Dataset Viewer
cr
stringlengths 22
57
| changes
stringlengths 667
1.71k
|
|---|---|
V2-CR4-expect_fail-skipped_1620.pdf
|
The changes detailed in the document are:
Configure Interface and IP for CORE, DIST1, DIST2, ACC1, ACC2 (Loopback2 interfaces with IPs 40.2.1.1-40.2.1.5 respectively); Configure OSPF for IPs 40.2.1.1-40.2.1.5 on Loopback2 interfaces of CORE, DIST1, DIST2, ACC1, ACC2; Configure OSPF for IP range 40.1.1.0/30 on Physical interface for CORE, DIST1, DIST2, ACC1, ACC2; Configure OSPF for IP range 40.1.1.248/29 on Lo0 for CORE, DIST1, DIST2, ACC1, ACC2; Configure OSPF for IP range 40.40.40.0/29 on Lo1 for CORE, DIST1, DIST2, ACC1, ACC2; Remove OSPF for IP range 0.0.0.0/0 from CORE, DIST1, DIST2, ACC1, ACC2; Create and enable new virtual servers (details not specified in form); Add new static routes (details not specified in form); Add static routes and ACL on 2x Catalyst 9300 MACSEC switches (details not specified in form); Update Master Inventory List, Network Diagram, IP Address List, IP Subnet & VLAN List
|
V2-CR2.4-expect_fail-5_devices_1_performed_extra_step.pdf
|
Add Loopback2 interfaces with specific IP addresses to CORE, DIST1, DIST2, ACC1, ACC2 devices; Configure OSPF on Loopback2 interfaces with specific IP addresses on CORE, DIST1, DIST2, ACC1, ACC2 devices; Configure OSPF on various IP ranges (40.1.1.0/30, 40.1.1.248/29, 40.40.40.0/29) on Physical, Lo0, and Lo1 interfaces across CORE, DIST1, DIST2, ACC1, ACC2 devices; Remove OSPF configuration for 0.0.0.0/0 from DIST1, DIST2, ACC1, ACC2; Create and enable new virtual servers; Add new static routes; Add static routes and ACLs on 2x Catalyst 9300 MACSEC switches; Update Master Inventory List, Network Diagram, Network switch patching record, Physical Rack Layout List, IP Address List (IP Subnet & VLAN List), and Equipment cabling patching record.
|
V2-CR2-expect_pass.pdf
|
The changes detailed in the document are:
* **Subject of Change:** Network, Hardware, Procedure.
* **Justification/Reason for Change:** Project (Enhancement).
* **e. Detail Description of Change:**
* **i. Configure Interface IP:** Add IP addresses 40.2.1.1, 40.2.1.2, 40.2.1.3, 40.2.1.4, 40.2.1.5 to Loopback2 interfaces on CORE, DIST1, DIST2, ACC1, and ACC2 respectively.
* **ii. Configure OSPF for IP Interface:** Add OSPF configuration for IP addresses 40.2.1.1, 40.2.1.2, 40.2.1.3, 40.2.1.4, 40.2.1.5 on Loopback2 interfaces on CORE, DIST1, DIST2, ACC1, and ACC2 respectively.
* **iii. Configure OSPF to IP Range for Interface in Hostname:**
* Add OSPF configuration for IP range 40.1.1.0/30 on Physical interface for CORE, DIST1, DIST2, ACC1, ACC2.
* Add OSPF configuration for IP range 40.1.1.248/29 on Lo0 interface for CORE, DIST1, DIST2, ACC1, ACC2.
* Add OSPF configuration for IP range 40.40.40.0/29 on Lo1 interface for CORE, DIST1, DIST2, ACC1, ACC2.
* Remove OSPF configuration for IP range 0.0.0.0/0 from CORE, DIST1, DIST2, ACC1, ACC2.
* **PART (5) DEPLOYMENT INSTRUCTIONS:**
* Create new virtual servers using provided information (details not filled in the table).
* Add a new static route (details not filled in the table).
* Add static routes on 2x Catalyst 9300 MACSEC switches (details not filled in the table).
* Add ACL on 2x Catalyst 9300 MACSEC switches (details not filled in the table).
* **Inventory Update:** Master Inventory List, Network Diagram, Network switch patching record, Physical Rack Layout List, IP Address List, IP Subnet & VLAN List, Equipment cabling patching record.
|
V2-CR2.1-expect_pass-disordered_steps.pdf
|
Adding IPs 40.2.1.1-40.2.1.5 to Loopback2 interfaces on CORE, DIST1, DIST2, ACC1, ACC2; Configuring OSPF for IPs 40.2.1.1-40.2.1.5 on Loopback2 interfaces on CORE, DIST1, DIST2, ACC1, ACC2; Adding OSPF configuration for IP range 40.1.1.0/30 on Physical interfaces of CORE, DIST1, DIST2, ACC1, ACC2; Adding OSPF configuration for IP range 40.1.1.248/29 on Lo0 interfaces of CORE, DIST1, DIST2, ACC1, ACC2; Adding OSPF configuration for IP range 40.40.40.0/29 on Lo1 interfaces of CORE, DIST1, DIST2, ACC1, ACC2; Removing OSPF configuration for IP range 0.0.0.0/0 from CORE, DIST1, DIST2, ACC1, ACC2; Creation of new virtual servers (details not provided in table); Adding new static routes (details not provided in table); Adding static routes and ACLs on 2x Catalyst 9300 MACSEC switches (details not provided in table)
|
V2-CR2.2-expect_fail-1_device_performed_extra_step.pdf
|
Configure interface 40.2.1.1 Loopback2 (add CORE); Configure OSPF for IP 40.2.1.1 interface Loopback2 (add CORE); Configure OSPF for IP range 40.1.1.0/30 Physical interface (add CORE); Configure OSPF for IP range 40.1.1.248/29 Lo0 (add CORE); Configure OSPF for IP range 40.40.40.0/29 Lo1 (add CORE); Update Master Inventory List; Update Network Diagram; Update Network switch patching record; Update Physical Rack Layout List; Update IP Address List, IP Subnet & VLAN List; Update Equipment cabling patching record; Create new virtual servers; Add a new static route; Add static routes on 2x Catalyst 9300 MACSEC switches; Add ACL on 2x Catalyst 9300 MACSEC switches
|
V2-CR3-expect_fail-skipped_xiv.pdf
|
The following changes are detailed in the document:
Add Loopback 2 IP 40.2.1.1 to CORE switch; Add Loopback 2 IP 40.2.1.2 to DIST1 switch; Add Loopback 2 IP 40.2.1.3 to DIST2 switch; Add Loopback 2 IP 40.2.1.4 to ACC1 switch; Add Loopback 2 IP 40.2.1.5 to ACC2 switch; Configure OSPF for 40.2.1.1 loopback on CORE switch; Configure OSPF for 40.2.1.2 loopback on DIST1 switch; Configure OSPF for 40.2.1.3 loopback on DIST2 switch; Configure OSPF for 40.2.1.4 loopback on ACC1 switch; Configure OSPF for 40.2.1.5 loopback on ACC2 switch; Configure OSPF for 40.1.1.0/30 network range for physical interface connectivity in all switches; Configure OSPF for 40.1.1.248/29 network range for Lo0 connectivity in all switches; Configure OSPF for 40.40.40.0/29 network range for Lo1 connectivity in all switches; Remove OSPF configuration for 0.0.0.0 255.255.255.255 area 0 from all switches.
|
V2-CR7-expect_pass.pdf
|
Arrange physical access to the rack where equipment is housed; Arrange laptop for network migration; Ensure unused configuration can be removed (tunnel interface, multicast); At CORE, DIST1, DIST2, ACC1, and ACC2 switches, add Loopback 2 IP addresses (40.2.1.1-40.2.1.5); At CORE, DIST1, DIST2, ACC1, and ACC2 switches, configure OSPF for Loopback 2 IPs (40.2.1.1-40.2.1.5); In all switches, configure OSPF for 40.1.1.0/30 network range (physical interface connectivity), 40.1.1.248/29 network range (Lo0 connectivity), and 40.40.40.0/29 network range (Lo1 connectivity); In all switches, remove OSPF configuration for 0.0.0.0 255.255.255.255 area 0; Do a pre-migration ping test of all endpoints connected in "Traditional Network" segment; Do a post-migration ping test of all endpoints connected in "Traditional Network" segment; Back Out Activity: In all switches, remove specific network ranges in OSPF configuration (40.1.1.0/30, 40.1.1.248/29, 40.40.40.1/29); Back Out Activity: In all switches, add the global network range in OSPF configuration (0.0.0.0 255.255.255.255 area 0) to router ospf 1 configuration
|
V2-CR8-expect_fail-skipped_line5.pdf
|
Change Request Approved; Arrange physical access to the rack where equipment is housed; Arrange laptop for network migration; Ensure unused configuration can be removed (tunnel interface, multicast); At CORE switch, add Loopback 2 IP 40.2.1.1; At DIST1 switch, add Loopback 2 IP 40.2.1.2; At DIST2 switch, add Loopback 2 IP 40.2.1.3; At ACC1 switch, add Loopback 2 IP 40.2.1.4; At ACC2 switch, add Loopback 2 IP 40.2.1.5; At CORE switch, configure OSPF for 40.2.1.1 loopback; At DIST1 switch, configure OSPF for 40.2.1.2 loopback; At DIST2 switch, configure OSPF for 40.2.1.3 loopback; At ACC1 switch, configure OSPF for 40.2.1.4 loopback; At ACC2 switch, configure OSPF for 40.2.1.5 loopback; In all switches, configure OSPF for 40.1.1.0/30 network range for physical interface connectivity; In all switches, configure OSPF for 40.1.1.248/29 network range for Lo0 connectivity; In all switches, configure OSPF for 40.40.40.0/29 network range for Lo1 connectivity; In all switches, remove OSPF configuration for 0.0.0.0 255.255.255.255 area 0
|
V2-CR6-expect_fail-wrong_mask_610.pdf
|
Add Loopback2 interfaces with IP addresses 40.2.1.1 on CORE, 40.2.1.2 on DIST1, 40.2.1.3 on DIST2, 40.2.1.4 on ACC1, and 40.2.1.5 on ACC2; Configure OSPF for Loopback2 interfaces with IP addresses 40.2.1.1 on CORE, 40.2.1.2 on DIST1, 40.2.1.3 on DIST2, 40.2.1.4 on ACC1, and 40.2.1.5 on ACC2; Add OSPF configuration for IP range 40.1.1.0/30 on Physical interface on CORE, DIST1, DIST2, ACC1, ACC2; Add OSPF configuration for IP range 40.1.1.248/30 on Lo0 interface on CORE, DIST1, DIST2, ACC1, ACC2; Add OSPF configuration for IP range 40.40.40.0/29 on Lo1 interface on CORE, DIST1, DIST2, ACC1, ACC2; Remove OSPF configuration for IP range 0.0.0.0/0 on CORE, DIST1, DIST2, ACC1, ACC2.
|
V2-CR5-expect_fail-wrong_mask_xiii.pdf
|
Affected Configuration Items: CORE, DIST1, DIST2, ACC1, ACC2; Added IP 40.2.1.1 to CORE; Added IP 40.2.1.2 to DIST1; Added IP 40.2.1.2 to DIST2; Added IP 40.2.1.4 to ACC1; Added IP 40.2.1.5 to ACC2; Add Loopback 2 IP 40.2.1.1 at CORE switch; Add Loopback 2 IP 40.2.1.2 at DIST1 switch; Add Loopback 2 IP 40.2.1.3 at DIST2 switch; Add Loopback 2 IP 40.2.1.4 at ACC1 switch; Add Loopback 2 IP 40.2.1.5 at ACC2 switch; Configure OSPF for 40.2.1.1 loopback at CORE switch; Configure OSPF for 40.2.1.2 loopback at DIST1 switch; Configure OSPF for 40.2.1.3 loopback at DIST2 switch; Configure OSPF for 40.2.1.4 loopback at ACC1 switch; Configure OSPF for 40.2.1.5 loopback at ACC2 switch; Configure OSPF for 40.1.1.0/30 network range for physical interface connectivity in all switches; Configure OSPF for 40.1.1.248/30 network range for Lo0 connectivity in all switches; Configure OSPF for 40.40.40.0/29 network range for Lo1 connectivity in all switches; Remove OSPF configuration for 0.0.0.0 255.255.255.255 area 0 in all switches; Back-out step: Remove OSPF 40.1.1.0/30 network range for physical interface connectivity in all switches; Back-out step: Remove OSPF 40.1.1.248/30 network range for Lo0 connectivity in all switches; Back-out step: Remove OSPF 40.40.40.0/29 network range for Lo1 connectivity in all switches; Back-out step: Add back OSPF global network range 0.0.0.0 255.255.255.255 area 0 to router ospf 1 configuration in all switches; Test plan step: Conduct pre-migration ping test of all endpoints connected in Traditional Network segment; Test plan step: Conduct post-migration ping test of all endpoints connected in Traditional Network segment.
|
V2-CR2.3-expect_fail-2_devices_1_performed_extra_step.pdf
|
Type of Change: Network; Type of Change: Hardware; Justification: Preventive Maintenance; Add IP 40.2.1.1 to Loopback2 interface on CORE device; Add IP 40.2.1.2 to Loopback2 interface on DIST1 device; Configure OSPF for 40.2.1.1 on Loopback2 interface on CORE device; Configure OSPF for 40.2.1.2 on Loopback2 interface on DIST1 device; Configure OSPF for IP range 40.1.1.0/30 on Physical interface on CORE device; Configure OSPF for IP range 40.1.1.0/30 on Physical interface on DIST1 device; Configure OSPF for IP range 40.1.1.248/29 on Lo0 interface on CORE device; Configure OSPF for IP range 40.1.1.248/29 on Lo0 interface on DIST1 device; Configure OSPF for IP range 40.40.40.0/29 on Lo1 interface on CORE device; Configure OSPF for IP range 40.40.40.0/29 on Lo1 interface on DIST1 device; Remove OSPF configuration for IP range 0.0.0.0/0 on DIST1 device; Create new virtual servers (details not specified in table); Add a new static route (details not specified in table); Add static routes and ACL on 2x Catalyst 9300 MACSEC switches (details not specified in tables).
|
V2-CR1-expect_pass.pdf
|
Affected Configuration Items: CORE, DIST1, DIST2, ACC1, ACC2; Adding Loopback 2 IP 40.2.1.1 to CORE; Adding Loopback 2 IP 40.2.1.2 to DIST1; Adding Loopback 2 IP 40.2.1.3 to DIST2; Adding Loopback 2 IP 40.2.1.4 to ACC1; Adding Loopback 2 IP 40.2.1.5 to ACC2; Configuring OSPF for 40.2.1.1 loopback on CORE switch; Configuring OSPF for 40.2.1.2 loopback on DIST1 switch; Configuring OSPF for 40.2.1.3 loopback on DIST2 switch; Configuring OSPF for 40.2.1.4 loopback on ACC1 switch; Configuring OSPF for 40.2.1.5 loopback on ACC2 switch; Configuring OSPF for 40.1.1.0/30 network range for physical interface connectivity in all switches; Configuring OSPF for 40.1.1.248/29 network range for Lo0 connectivity in all switches; Configuring OSPF for 40.40.40.0/29 network range for Lo1 connectivity in all switches; Removing OSPF configuration for 0.0.0.0 255.255.255.255 area 0 in all switches.
|
V2-CR9-expect_fail-wrong_mask.pdf
|
Change Request Approved; Arrange physical access to the rack where equipment is housed; Arrange laptop for network migration; Ensure unused configuration can be removed (tunnel interface, multicast); Add Loopback 2 IPs (40.2.1.1-40.2.1.5) to CORE, DIST1, DIST2, ACC1, ACC2 switches; Configure OSPF for Loopback 2 IPs (40.2.1.1-40.2.1.5) on CORE, DIST1, DIST2, ACC1, ACC2 switches; Configure OSPF for network ranges 40.1.1.0/30 (physical interface), 40.1.1.248/30 (Lo0), and 40.40.40.1/29 (Lo1) across all switches; Remove global OSPF configuration (0.0.0.0 255.255.255.255 area 0) from all switches; Conduct pre-migration ping test of all endpoints in "Traditional Network" segment; Conduct post-migration ping test of all endpoints in "Traditional Network" segment; Define back out activities including removal of specific OSPF network ranges and addition of global OSPF network range.
|
README.md exists but content is empty.
- Downloads last month
- 7