Daily Papers

Future planetary exploration rovers must operate for extended durations on hybrid power inputs that combine steady radioisotope thermoelectric generator (RTG) output with variable solar photovoltaic (PV) availability. While energy-aware planning has been studied for aerial and underwater robots under battery limits, few works for ground rovers explicitly model power flow or enforce instantaneous power constraints. Classical terrain-aware planners emphasize slope or traversability, and trajectory optimization methods typically focus on geometric smoothness and dynamic feasibility, neglecting energy feasibility. We present an energy-constrained trajectory planning framework that explicitly integrates physics-based models of translational, rotational, and resistive power with baseline subsystem loads, under hybrid RTG-solar input. By incorporating both cumulative energy budgets and instantaneous power constraints into SE(2)-based polynomial trajectory optimization, the method ensures trajectories that are simultaneously smooth, dynamically feasible, and power-compliant. Simulation results on lunar-like terrain show that our planner generates trajectories with peak power within 0.55 percent of the prescribed limit, while existing methods exceed limits by over 17 percent. This demonstrates a principled and practical approach to energy-aware autonomy for long-duration planetary missions.

Spiking Neural Networks (SNNs) are energy efficient alternatives to commonly used deep neural networks (DNNs). Through event-driven information processing, SNNs can reduce the expensive compute requirements of DNNs considerably, while achieving comparable performance. However, high inference latency is a significant hindrance to the edge deployment of deep SNNs. Computation over multiple timesteps not only increases latency as well as overall energy budget due to higher number of operations, but also incurs memory access overhead of fetching membrane potentials, both of which lessen the energy benefits of SNNs. To overcome this bottleneck and leverage the full potential of SNNs, we propose an Iterative Initialization and Retraining method for SNNs (IIR-SNN) to perform single shot inference in the temporal axis. The method starts with an SNN trained with T timesteps (T>1). Then at each stage of latency reduction, the network trained at previous stage with higher timestep is utilized as initialization for subsequent training with lower timestep. This acts as a compression method, as the network is gradually shrunk in the temporal domain. In this paper, we use direct input encoding and choose T=5, since as per literature, it is the minimum required latency to achieve satisfactory performance on ImageNet. The proposed scheme allows us to obtain SNNs with up to unit latency, requiring a single forward pass during inference. We achieve top-1 accuracy of 93.05%, 70.15% and 67.71% on CIFAR-10, CIFAR-100 and ImageNet, respectively using VGG16, with just 1 timestep. In addition, IIR-SNNs perform inference with 5-2500X reduced latency compared to other state-of-the-art SNNs, maintaining comparable or even better accuracy. Furthermore, in comparison with standard DNNs, the proposed IIR-SNNs provide25-33X higher energy efficiency, while being comparable to them in classification performance.

Understanding the physics of planetary magma oceans has been the subject of growing efforts, in light of the increasing abundance of Solar system samples and extrasolar surveys. A rocky planet harboring such an ocean is likely to interact tidally with its host star, planetary companions, or satellites. To date, however, models of the tidal response and heat generation of magma oceans have been restricted to the framework of weakly viscous solids, ignoring the dynamical fluid behavior of the ocean beyond a critical melt fraction. Here we provide a handy analytical model that accommodates this phase transition, allowing for a physical estimation of the tidal response of lava worlds. We apply the model in two settings: The tidal history of the early Earth-Moon system in the aftermath of the giant impact; and the tidal interplay between short-period exoplanets and their host stars. For the former, we show that the fluid behavior of the Earth's molten surface drives efficient early Lunar recession to {sim} 25 Earth radii within 10^4{-} 10^5 years, in contrast with earlier predictions. For close-in exoplanets, we report on how their molten surfaces significantly change their spin-orbit dynamics, allowing them to evade spin-orbit resonances and accelerating their track towards tidal synchronization from a Gyr to Myr timescale. Moreover, we re-evaluate the energy budgets of detected close-in exoplanets, highlighting how the surface thermodynamics of these planets are likely controlled by enhanced, fluid-driven tidal heating, rather than vigorous insolation, and how this regime change substantially alters predictions for their surface temperatures.

Global climate models typically operate at a grid resolution of hundreds of kilometers and fail to resolve atmospheric mesoscale processes, e.g., clouds, precipitation, and gravity waves (GWs). Model representation of these processes and their sources is essential to the global circulation and planetary energy budget, but subgrid scale contributions from these processes are often only approximately represented in models using parameterizations. These parameterizations are subject to approximations and idealizations, which limit their capability and accuracy. The most drastic of these approximations is the "single-column approximation" which completely neglects the horizontal evolution of these processes, resulting in key biases in current climate models. With a focus on atmospheric GWs, we present the first-ever global simulation of atmospheric GW fluxes using machine learning (ML) models trained on the WINDSET dataset to emulate global GW emulation in the atmosphere, as an alternative to traditional single-column parameterizations. Using an Attention U-Net-based architecture trained on globally resolved GW momentum fluxes, we illustrate the importance and effectiveness of global nonlocality, when simulating GWs using data-driven schemes.

Large language models (LLMs) have demonstrated remarkable capabilities across a wide range of natural language processing tasks. Exploiting the heterogeneous capabilities of edge LLMs is crucial for diverse emerging applications, as it enables greater cost-effectiveness and reduced latency. In this work, we introduce Mixture-of-Edge-Experts (MoE^2), a novel collaborative inference framework for edge LLMs. We formulate the joint gating and expert selection problem to optimize inference performance under energy and latency constraints. Unlike conventional MoE problems, LLM expert selection is significantly more challenging due to the combinatorial nature and the heterogeneity of edge LLMs across various attributes. To this end, we propose a two-level expert selection mechanism through which we uncover an optimality-preserving property of gating parameters across expert selections. This property enables the decomposition of the training and selection processes, significantly reducing complexity. Furthermore, we leverage the objective's monotonicity and design a discrete monotonic optimization algorithm for optimal expert selection. We implement edge servers with NVIDIA Jetson AGX Orins and NVIDIA RTX 4090 GPUs, and perform extensive experiments. Our results validate that performance improvements of various LLM models and show that our MoE^2 method can achieve optimal trade-offs among different delay and energy budgets, and outperforms baselines under various system resource constraints.

Quantization of Deep Neural Network (DNN) activations is a commonly used technique to reduce compute and memory demands during DNN inference, which can be particularly beneficial on resource-constrained devices. To achieve high accuracy, existing methods for quantizing activations rely on complex mathematical computations or perform extensive searches for the best hyper-parameters. However, these expensive operations are impractical on devices with limited computation capabilities, memory capacities, and energy budgets. Furthermore, many existing methods do not focus on sub-6-bit (or deep) quantization. To fill these gaps, in this paper we propose DQA (Deep Quantization of DNN Activations), a new method that focuses on sub-6-bit quantization of activations and leverages simple shifting-based operations and Huffman coding to be efficient and achieve high accuracy. We evaluate DQA with 3, 4, and 5-bit quantization levels and three different DNN models for two different tasks, image classification and image segmentation, on two different datasets. DQA shows significantly better accuracy (up to 29.28%) compared to the direct quantization method and the state-of-the-art NoisyQuant for sub-6-bit quantization.

Transformer-based large language models (LLMs) have demonstrated impressive capabilities in a variety of natural language processing (NLP) tasks. Nonetheless, it is challenging to deploy and fine-tune LLMs on mobile edge devices with limited computing, memory, and energy budgets. In this paper, we propose Confidant, a multi-backend collaborative training framework for customizing state-of-the-art LLMs on commodity mobile devices like smartphones. Confidant partitions an LLM into several sub-models so that each fits into a mobile device's memory. A pipeline parallel training mechanism is further developed to ensure fast and efficient distributed training. In addition, we propose a novel backend scheduler to allocate different attention heads to heterogeneous compute hardware, including mobile CPU and GPUs, to maximize the compute resource utilization on each edge device. Our preliminary experimental results show that Confidant achieves at most 45.3% memory reduction and 8.03x inference speedup in practical settings.

Using a newly developed `holistic' atmospheric model of the aerosol structure in Uranus's atmosphere, based upon observations made by HST/STIS, Gemini/NIFS and IRTF/SpeX from 2000 -- 2009, we make a new estimate the bolometric Bond albedo of Uranus during this time of A^* = 0.338 pm 0.011, with a phase integral of q^* = 1.36 pm 0.03. Then, using a simple seasonal model, developed to be consistent with the disc-integrated blue and green magnitude data from the Lowell Observatory from 1950 to 2016, we model how Uranus's reflectivity and heat budget vary during its orbit and determine new orbital-mean average value for the bolometric Bond albedo of A^* = 0.349 pm 0.016 and for the absorbed solar flux of P_mathrm{in}=0.604 pm 0.027 W m^{-2}. Assuming the outgoing thermal flux to be P_mathrm{out}=0.693 pm 0.013 W m^{-2}, as previously determined from Voyager 2 observations, we arrive at a new estimate of Uranus's average heat flux budget of P_out/P_in = 1.15 pm 0.06, finding considerable variation with time due to Uranus's significant orbital eccentricity of 0.046. This leads the flux budget to vary from P_out/P_in = 1.03 near perihelion, to 1.24 near aphelion. We conclude that although P_out/P_in is considerably smaller than for the other giant planets, Uranus is not in thermal equilibrium with the Sun.

Building huge and highly capable language models has been a trend in the past years. Despite their great performance, they incur high computational cost. A common solution is to apply model compression or choose light-weight architectures, which often need a separate fixed-size model for each desirable computational budget, and may lose performance in case of heavy compression. This paper proposes an effective dynamic inference approach, called E-LANG, which distributes the inference between large accurate Super-models and light-weight Swift models. To this end, a decision making module routes the inputs to Super or Swift models based on the energy characteristics of the representations in the latent space. This method is easily adoptable and architecture agnostic. As such, it can be applied to black-box pre-trained models without a need for architectural manipulations, reassembling of modules, or re-training. Unlike existing methods that are only applicable to encoder-only backbones and classification tasks, our method also works for encoder-decoder structures and sequence-to-sequence tasks such as translation. The E-LANG performance is verified through a set of experiments with T5 and BERT backbones on GLUE, SuperGLUE, and WMT. In particular, we outperform T5-11B with an average computations speed-up of 3.3times on GLUE and 2.9times on SuperGLUE. We also achieve BERT-based SOTA on GLUE with 3.2times less computations. Code and demo are available in the supplementary materials.

Artificial Intelligence (AI) weather prediction (AIWP) models are powerful tools for medium-range forecasts but often lack physical consistency, leading to outputs that violate conservation laws. This study introduces a set of novel physics-based schemes designed to enforce the conservation of global dry air mass, moisture budget, and total atmospheric energy in AIWP models. The schemes are highly modular, allowing for seamless integration into a wide range of AI model architectures. Forecast experiments are conducted to demonstrate the benefit of conservation schemes using FuXi, an example AIWP model, modified and adapted for 1.0-degree grid spacing. Verification results show that the conservation schemes can guide the model in producing forecasts that obey conservation laws. The forecast skills of upper-air and surface variables are also improved, with longer forecast lead times receiving larger benefits. Notably, large performance gains are found in the total precipitation forecasts, owing to the reduction of drizzle bias. The proposed conservation schemes establish a foundation for implementing other physics-based schemes in the future. They also provide a new way to integrate atmospheric domain knowledge into the design and refinement of AIWP models.

Large language models (LLMs) have revolutionized language processing, delivering outstanding results across multiple applications. However, deploying LLMs on edge devices poses several challenges with respect to memory, energy, and compute costs, limiting their widespread use in devices such as mobile phones. A promising solution is to reduce the number of bits used to represent weights and activations. While existing works have found partial success at quantizing LLMs to lower bitwidths, e.g. 4-bit weights, quantizing activations beyond 16 bits often leads to large computational overheads due to poor on-device quantization support, or a considerable accuracy drop. Yet, 8-bit activations are very attractive for on-device deployment as they would enable LLMs to fully exploit mobile-friendly hardware, e.g. Neural Processing Units (NPUs). In this work, we make a first attempt to facilitate the on-device deployment of LLMs using integer-only quantization. We first investigate the limitations of existing quantization methods for on-device deployment, with a special focus on activation quantization. We then address these limitations by introducing a simple post-training quantization method, named MobileQuant, that extends previous weight equivalent transformation works by jointly optimizing the weight transformation and activation range parameters in an end-to-end manner. MobileQuant demonstrates superior capabilities over existing methods by 1) achieving near-lossless quantization on a wide range of LLM benchmarks, 2) reducing latency and energy consumption by 20\%-50\% compared to current on-device quantization strategies, 3) requiring limited compute budget, 4) being compatible with mobile-friendly compute units, e.g. NPU.

As energy systems transform to rely on renewable energy and electrification, they encounter stronger year-to-year variability in energy supply and demand. However, most infrastructure planning is based on a single weather year, resulting in a lack of robustness. In this paper, we optimize energy infrastructure for a European energy system designed for net-zero CO_2 emissions in 62 different weather years. Subsequently, we fix the capacity layouts and simulate their operation in every weather year, to evaluate resource adequacy and CO_2 emissions abatement. We show that interannual weather variability causes variation of pm10\% in total system cost. The most expensive capacity layout obtains the lowest net CO_2 emissions but not the highest resource adequacy. Instead, capacity layouts designed with years including compound weather events result in a more robust and cost-effective design. Deploying CO_2-emitting backup generation is a cost-effective robustness measure, which only increase CO_2 emissions marginally as the average CO_2 emissions remain less than 1\% of 1990 levels. Our findings highlight how extreme weather years drive investments in robustness measures, making them compatible with all weather conditions within six decades of historical weather data.

Heat pumps are essential for decarbonizing residential heating but consume substantial electrical energy, impacting operational costs and grid demand. Many systems run inefficiently due to planning flaws, operational faults, or misconfigurations. While optimizing performance requires skilled professionals, labor shortages hinder large-scale interventions. However, digital tools and improved data availability create new service opportunities for energy efficiency, predictive maintenance, and demand-side management. To support research and practical solutions, we present an open-source dataset of electricity consumption from 1,408 households with heat pumps and smart electricity meters in the canton of Zurich, Switzerland, recorded at 15-minute and daily resolutions between 2018-11-03 and 2024-03-21. The dataset includes household metadata, weather data from 8 stations, and ground truth data from 410 field visit protocols collected by energy consultants during system optimizations. Additionally, the dataset includes a Python-based data loader to facilitate seamless data processing and exploration.

As the adoption of Generative AI in real-world services grow explosively, energy has emerged as a critical bottleneck resource. However, energy remains a metric that is often overlooked, under-explored, or poorly understood in the context of building ML systems. We present the ML.ENERGY Benchmark, a benchmark suite and tool for measuring inference energy consumption under realistic service environments, and the corresponding ML.ENERGY Leaderboard, which have served as a valuable resource for those hoping to understand and optimize the energy consumption of their generative AI services. In this paper, we explain four key design principles for benchmarking ML energy we have acquired over time, and then describe how they are implemented in the ML.ENERGY Benchmark. We then highlight results from the latest iteration of the benchmark, including energy measurements of 40 widely used model architectures across 6 different tasks, case studies of how ML design choices impact energy consumption, and how automated optimization recommendations can lead to significant (sometimes more than 40%) energy savings without changing what is being computed by the model. The ML.ENERGY Benchmark is open-source and can be easily extended to various customized models and application scenarios.

We present a large real-world dataset obtained from monitoring a smart company facility over the course of six years, from 2018 to 2023. The dataset includes energy consumption data from various facility areas and components, energy production data from a photovoltaic system and a combined heat and power plant, operational data from heating and cooling systems, and weather data from an on-site weather station. The measurement sensors installed throughout the facility are organized in a hierarchical metering structure with multiple sub-metering levels, which is reflected in the dataset. The dataset contains measurement data from 72 energy meters, 9 heat meters and a weather station. Both raw and processed data at different processing levels, including labeled issues, is available. In this paper, we describe the data acquisition and post-processing employed to create the dataset. The dataset enables the application of a wide range of methods in the domain of energy management, including optimization, modeling, and machine learning to optimize building operations and reduce costs and carbon emissions.

Scalable and cost-effective solutions to renewable energy storage are essential to addressing the world's rising energy needs while reducing climate change. As we increase our reliance on renewable energy sources such as wind and solar, which produce intermittent power, storage is needed to transfer power from times of peak generation to peak demand. This may require the storage of power for hours, days, or months. One solution that offers the potential of scaling to nation-sized grids is the conversion of renewable energy to other fuels, such as hydrogen or methane. To be widely adopted, this process requires cost-effective solutions to running electrochemical reactions. An open challenge is finding low-cost electrocatalysts to drive these reactions at high rates. Through the use of quantum mechanical simulations (density functional theory), new catalyst structures can be tested and evaluated. Unfortunately, the high computational cost of these simulations limits the number of structures that may be tested. The use of machine learning may provide a method to efficiently approximate these calculations, leading to new approaches in finding effective electrocatalysts. In this paper, we provide an introduction to the challenges in finding suitable electrocatalysts, how machine learning may be applied to the problem, and the use of the Open Catalyst Project OC20 dataset for model training.

Buildings are significant contributors to global greenhouse gas emissions, accounting for 26% of global energy sector emissions in 2022. Meeting net zero goals requires a rapid reduction in building emissions, both directly from the buildings and indirectly from the production of electricity and heat used in buildings. National energy planning for net zero demands both detailed and comprehensive building energy consumption data. However, geo-located building-level energy data is rarely available in Europe, with analysis typically relying on anonymised, simulated or low-resolution data. To address this problem, we introduce a dataset of Neighbourhood Energy, Buildings, and Urban Landscapes (NEBULA) for modelling domestic energy consumption for small neighbourhoods (5-150 households). NEBULA integrates data on building characteristics, climate, urbanisation, environment, and socio-demographics and contains 609,964 samples across England and Wales.

In the rapidly evolving realm of artificial intelligence, deploying large language models (LLMs) poses increasingly pressing computational and environmental challenges. This paper introduces MELODI - Monitoring Energy Levels and Optimization for Data-driven Inference - a multifaceted framework crafted to monitor and analyze the energy consumed during LLM inference processes. MELODI enables detailed observations of power consumption dynamics and facilitates the creation of a comprehensive dataset reflective of energy efficiency across varied deployment scenarios. The dataset, generated using MELODI, encompasses a broad spectrum of LLM deployment frameworks, multiple language models, and extensive prompt datasets, enabling a comparative analysis of energy use. Using the dataset, we investigate how prompt attributes, including length and complexity, correlate with energy expenditure. Our findings indicate substantial disparities in energy efficiency, suggesting ample scope for optimization and adoption of sustainable measures in LLM deployment. Our contribution lies not only in the MELODI framework but also in the novel dataset, a resource that can be expanded by other researchers. Thus, MELODI is a foundational tool and dataset for advancing research into energy-conscious LLM deployment, steering the field toward a more sustainable future.

Fine-tuning large models is highly effective, however, inference can be expensive and produces carbon emissions. Knowledge distillation has been shown to be a practical solution to reduce inference costs, but the distillation process itself requires significant computational resources. Rather than buying or renting GPUs to fine-tune, then distill a large model, an NLP practitioner might instead choose to allocate the available budget to hire annotators and manually label additional fine-tuning data. In this paper, we investigate how to most efficiently use a fixed budget to build a compact model. Through extensive experiments on six diverse tasks, we show that distilling from T5-XXL (11B) to T5-Small (60M) is almost always a cost-efficient strategy compared to annotating more data to directly train a compact model (T5-Small). We further investigate how the optimal budget allocated towards computation varies across scenarios. We will make our code, datasets, annotation cost estimates, and baseline models available as a benchmark to support further work on cost-efficient training of compact models.

AI computing and data centers consume a large amount of freshwater, both directly for cooling and indirectly for electricity generation. While most attention has been paid to developed countries such as the U.S., this paper presents the first-of-its-kind dataset that combines nation-level weather and electricity generation data to estimate water usage efficiency for data centers in 41 African countries across five different climate regions. We also use our dataset to evaluate and estimate the water consumption of inference on two large language models (i.e., Llama-3-70B and GPT-4) in 11 selected African countries. Our findings show that writing a 10-page report using Llama-3-70B could consume about 0.7 liters of water, while the water consumption by GPT-4 for the same task may go up to about 60 liters. For writing a medium-length email of 120-200 words, Llama-3-70B and GPT-4 could consume about 0.13 liters and 3 liters of water, respectively. Interestingly, given the same AI model, 8 out of the 11 selected African countries consume less water than the global average, mainly because of lower water intensities for electricity generation. However, water consumption can be substantially higher in some African countries with a steppe climate than the U.S. and global averages, prompting more attention when deploying AI computing in these countries. Our dataset is publicly available on https://huggingface.co/datasets/masterlion/WaterEfficientDatasetForAfricanCountries/tree/main{Hugging Face}.

Artificial intelligence systems significantly impact the environment, particularly in natural language processing (NLP) tasks. These tasks often require extensive computational resources to train deep neural networks, including large-scale language models containing billions of parameters. This study analyzes the trade-offs between energy consumption and performance across three neural language models: two pre-trained models (T5-base and BART-base), and one large language model (LLaMA 3-8B). These models were fine-tuned for the text summarization task, focusing on generating research paper highlights that encapsulate the core themes of each paper. A wide range of evaluation metrics, including ROUGE, METEOR, MoverScore, BERTScore, and SciBERTScore, were employed to assess their performance. Furthermore, the carbon footprint associated with fine-tuning each model was measured, offering a comprehensive assessment of their environmental impact. This research underscores the importance of incorporating environmental considerations into the design and implementation of neural language models and calls for the advancement of energy-efficient AI methodologies.

The environmental impact of Artificial Intelligence (AI) is emerging as a significant global concern, particularly regarding model training. In this paper, we introduce GREEN (Guided Recommendations of Energy-Efficient Networks), a novel, inference-time approach for recommending Pareto-optimal AI model configurations that optimize validation performance and energy consumption across diverse AI domains and tasks. Our approach directly addresses the limitations of current eco-efficient neural architecture search methods, which are often restricted to specific architectures or tasks. Central to this work is EcoTaskSet, a dataset comprising training dynamics from over 1767 experiments across computer vision, natural language processing, and recommendation systems using both widely used and cutting-edge architectures. Leveraging this dataset and a prediction model, our approach demonstrates effectiveness in selecting the best model configuration based on user preferences. Experimental results show that our method successfully identifies energy-efficient configurations while ensuring competitive performance.